https://api-pimcore.palfinger.com/productdata-export/v2/productdetail/PK+12002-EH_S106-SK-D/emea/en

Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281

Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 12002 EH High Performance

The compact design and Power Link Plus are attribues for efficiency and cost effectiveness

  • Maximum precision and safety due to optional AOS
  • High value retention thanks to coating technology
  • Maximum reliability due to PAL 50
  • High operator friendliness thanks to optional radio remote control
  • Additional applications with Power Link Plus
Brochures
PK 11002 / 12002 EH
Max. lifting moment11.0
Max. lifting capacity5700
Max. hydraulic outreach14.1
Slewing angle400°
Slewing torque1.3
Stabilizer spread (std)3.2 m
Fitting space required (std)0.70
Width folded2.33
Max. operating pressure350
Pump capacity45 - 60 l/min
Dead weight (std.)1158
Drawing
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.



Lifting moment

Outreach

Slewing angle

Slewing torque (mt)

Pressure

Pump capacity (l/min)

Crane Weight

Crane Height

Crane Width

Installation Width

Max stroke lenght

Max lifting capacity

Load vertical
Std11.0 mt5.8 m400 1.3 35.0 Mpa45 - 60 1158 kg2150 mm2325 mm700 mm5598.22 mm- 2000 kg
A10.7 mt7.7 m400 1.3 35.0 Mpa45-60 1268 kg2150 mm2325 mm700 mm7578.22 mm5580 kg1380 kg
B10.4 mt9.9 m400 1.3 35.0 Mpa45-60 1384 kg2150 mm2325 mm700 mm9708.22 mm5460 kg1000 kg
C10.1 mt12.0 m400 1.3 35.0 Mpa45-60 1489 kg2150 mm2330 mm700 mm11838.22 mm5360 kg730 kg
D9.8 mt14.1 m400 1.3 35.0 Mpa45-60 1585 kg2150 mm2380 mm735 mm13968.22 mm5260 kg530 kg
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Drawing